Product details
Manufactured byEmerson
Product groupRectifier
DescriptionEmerson CANDEO SP48300 Small Power System, -48V Nominal System Voltage, System rated output current @ - 54 V: 580 A.
OverviewThe Candeo SP 48300 power system is a modular –48 V dc power system available in various configurations and capacities up to 300 A. A basic system consists of a power shelf that incorporates a basic or advanced microprocessor based controller and up to five 1500 W plug-in rectifiers, and a distribution panel with 18 plug-in positions for load protection devices and eight positions for connecting batteries with or without protection devices. A second power shelf that accommodates up to six 1500 W plug-in rectifiers and a second distribution panel with 26 plug-in positions for load protection devices can be added to increase the capacity as required. The system can operate with batteries or in the batteryless mode.The Candeo SP 48300 power system is a front access system designed to be used on standard relay rack type frames or in embedded applications with standard 23” mounting, with or without batteries. The system meets Telcordia requirements for seismic zone 4 when mounted in equipment that does so (rack, cabinet, enclosure, etc.). The system is shipped from the factory with mounting brackets installed on each side of the shelves for either projected or flush mounting, as specified when ordering the system.The Controller SP of the Candeo SP 48300 power system provides a variety of monitoring, alarm and control features normally found on power systems’ controllers, such as high and low voltage alarms, battery on discharge alarm, fuse and circuit breaker alarms, rectifier failure alarms, boost charge, load low voltage disconnect (LLVD) or battery low voltage disconnect (BLVD), temperature compensation, etc.The System Manager SP, in addition to all of the Controller SP’s functions, provides advanced features such as configurable input/output ports, a graphical display, a charge control function, a built-in web server, etc.The Candeo SP 48300 power system utilizes 1500 W rectifiers connected in parallel as building blocks to reach the maximum capacity of 300 A. The rectifiers operate from a 110/120 or 208/240 V single-phase 50/60 Hz AC source. The controller automatically sets all the operational parameters of the rectifiers in the system as these are inserted (plugged-in). Should the controller fail or be removed from the system, the rectifiers then revert to the factory default value of 52.1 V.Distribution is achieved through either bullet type circuit breakers or fuse blocks that plug into the distribution panel(s). One side of the protective device plugs into a main rail bus, while the other side plugs into a load clip.
Manufacturer, product group, and supply
See who makes this product, where it belongs, and where available inventory may be listed.
Manufactured by
Emerson
View Emerson profile
Available from
Sourcing support available
Start a sourcing request